Printers
Mime type advanced settings
This section covers mime type (printer language specific) specific settings in InterformNG2. Depending on the type of mime type (the printer language, that is to be used for the specific printer), one of these options are listed: Advanced PCL ...
Driver print
There are multiple printer languages to select from when you connect a printer to InterformNG2. The standard print data streams (mime types), which are recommended are: PCL (which selects PCL5c), PCL6, ZPL or PDF. However not all printer support one ...
Confirmed print status
When InterformNG2 is printing via a physical printer, then the usual procedure is, that InterformNG2 generates a print data stream, which is sent to the printer and if the complete print data stream was sent to the printer, then the assumption is, ...
Create PCL6 document
With this workflow component you can merge an input file with a template (both InterformNG2 and InterformNG templates) to create the print data stream in PCL6 format. This can later be sent to a (laser) printer, that supports PCL6. This workflow ...
Printer connection options
The possible connection methods for printers are: System/OS Direct socket LPD protocol IPP protocol SMB Protocol Preview Remote print client System/OS If you want to print on a printer, that is configured on the operating system, then you can ...
Printers
This section concerns printers for a tenant. For a normal setup you need to configure all printers before you can use them in the InterformNG2 workflow e.g. for the Print component. This is covered below. If you however have a license for ...